Omron Accurax G5
Accurax G5 gives you that extra edge to build faster, accurate, smaller and safer machines. You will gain almost 25% in motor weight reduction and 50% savings in cabinet space. You will achieve sub micron precision and ms settling time.
EtherCAT, MECHATROLINK-II and Analog/Pulse drive models
Frequency response of 2kHz
Safety conforming to ISO13849-1 (PL d)
High accuracy provided by 20 bit encoder
Drive Programming: embedded indexer functionality in the Analogue/Pulse models
Advanced vibration suppression
Full closed loop encoder built-in
Double registration input provides application versatility
Configuration and commissioning using CX-Drive software
Omron Xtradrive
If your application demands the highest accuracy, the shortest cycle time in the most compact size and the ability to connect to ProfiBus or CAN, then look no further than XtraDrive. Complex motions such as cams, gears and linked axes are also available.
Patented non-linear technique for tight control
Very low tracking error with no overshoot and zero settling time
The ideal drive for linear-motor control
Supports various servo-motor encoder types
Profibus embedded
Omron Sigma 5
There are no compromises when it comes to the quality, reliability and performance of the new Sigma-5. It is designed to provide all that one expects from a servo and more.
Integrated MECHATROLINK-II Motion Network
Frequency response of 1.6 kHz
Quick positioning and smooth control
Mechanical vibration suppression
Space saving
Proven quality and reliability
Easy of use
Omron Sigma II
The Sigma II servo series (SGDH) was designed with ZERO compromise on quality, reliability or performance. The servo amplifiers are ultra-compact with pulse and analogue inputs as standard, plus an auto-tuning function. Plug-in option cards offer enhanced functionality such as indexing and complex motions such as cams, gears and linked axes.
300% peak current for 3 seconds
Automatic motor recognition with auto-tuning function
Analogue and pulse inputs for speed, torque and position control
Option units for field buses, MECHATROLINK-II, Servos and motion controller and indexers
Trace function allowing oscilloscope function
Omron G Series ML II
The G-series servo drive with built-in MECHATROLINK-II significantly reduces wiring and set-up time, while saving up to 30% of cabinet space. So you not only save on space, wiring and installation time, but also significantly reduce the chance of connection errors.
Built-in MECHATROLINK-II motion bus
Pocket-size servo
Positioning, speed and torque control modes
High starting torque: 300% for 3 sec
Fast and accurate positioning
Separated supply for main power and control power
Vibration suppression and adaptive resonance suppression filter
Incremental and absolute encoder available
Omron Junma ML II
Junma compact servo drive with built-in MECHATROLINK-II significantly reduces wiring and set-up time, while saving up to 30% of cabinet space. The Junma series is the first in the world to be fully tuning-free and program-less.
Output range from 100W to 750W
Drive with built-in MECHATROLINK-II port
Tuning-free technology, no gain parameters need to be set
Peak torque 300% of nominal for 3 seconds
Position resolution of 8,192 steps per revolution
Omron Smartstep II
The new SmartStep offers an ideal solution for point-to-point motion applications where simplicity is essential. SmartStep 2 keeps things simple whilst combining high performance and advanced features in a cost effective solution.
Ultra-compact size. The footprint is only 48% compared to the previous SmartStep
Vibration suppression
Adaptive resonance suppression filter
Feedback pulse output
On-line Auto-tuning and Easy set up
Electronic gear, four internal speed settings and wide range of pulse settings
Two torque limits
Position control via pulse input 500 kpps
Configuration and commissioning using CX-Drive software
Updating content, please wait...
